[PSUBS-MAILIST] scrubber filter

[hank pronk via Personal_Submersibles]

Sean,I think the air flow is a bit to high, but the filter should slow it down.  I get a much better reading if the sensor is closer to the scrubber outflow (1100 ppm)  The cabin does not get well circulated.  My other scrubber was better for that because the scrubber fan is oriented better for air circulation.   Normally when I dive I run my interior fan periodically just for comfort also.Hank 

    On Saturday, February 11, 2017 5:14 PM, Sean T. Stevenson via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
 

 Hank, I can't help but think that you should be doing better than 1500 - 1700. How fast is the airflow through your scrubber, where is the meter in relation to it, and does the cabin air get well circulated?Sean


On February 11, 2017 2:33:49 PM MST, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
Hi All,I did a scrubber test with my new 1kg radial scrubber.  It keeps Gamma at 1570 ppm to 1700 ppm it seems to fluctuate for some reason.  I am adding a discharge filter though because my absorbent was dusty. Hank
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170212/39552d0e/attachment.html>