[PSUBS-MAILIST] Scrubber

Wed Dec 13 21:48:29 EST 2017

It could be done easily just a twist on some studs counter to the fan rotation. Have an extra fan or 2 for backup quick connect electrical. Turn the absorbent canister into a cartridge and wrap for easy storage and deployment.    
--------------------------------------------
On Wed, 12/13/17, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: Re: [PSUBS-MAILIST] Scrubber
 To: "Brian Cox via Personal_Submersibles" <personal_submersibles at psubs.org>
 Date: Wednesday, December 13, 2017, 7:51 PM

             Hi Pete,I can do, I will try to
 remember tomorrow.  I like that idea to just replace the
 canister onto a fan assembly.  In fact I love that idea, it
 would have to be designed to replace quickly.
  Hank

                         On Wednesday, December 13, 2017,
 6:16:16 PM MST, Brian Cox via Personal_Submersibles
 <personal_submersibles at psubs.org> wrote:

                     You would want
 enough on hand to give you 72 hours per person.

 Brian

 --- personal_submersibles at psubs.org
 wrote:

 From: Pete Niedermayr via
 Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles
 General Discussion <personal_submersibles at psubs.org>
 Subject: Re:
 [PSUBS-MAILIST] Scrubber
 Date: Thu, 14 Dec 2017 00:43:47 +0000 (UTC)

 Hank, Pleases post some
 pictures. My thought is multiple small scrubbers sealed in
 cling wrap is the to go. When one is spent unwrap another
 attach the fan and rock n roll. One could make a router
 template to make the flat parts for a design like Alec's
 and easily churn a couple of scrubbers. 
 --------------------------------------------
 On Sun, 12/10/17, hank
 pronk via Personal_Submersibles <personal_submersibles at psubs.org>
 wrote:

  Subject: Re:
 [PSUBS-MAILIST] Scrubber
  To: "Brian Cox via
 Personal_Submersibles" <personal_submersibles at psubs.org>
  Date: Sunday, December
 10, 2017, 6:31 PM

              Brian,I
 made a scrubber last

 year that works a treat from 4 inch PVC pipe with a 2
 inch
  hollow core made
 with you guessed it 2 inch PVC end caps.
   I bought some screen to
 cover the aluminum mesh and had to
  do a tiny bit of
 machining.  I used a PVC threaded cap with
  foam under the cap to
 compress the absorbent.  Not pretty,
  but works fantastic for
 under 20 dollars.  Seems anything
  can be a scrubber!Hank

                        On Sunday, December 10,
 2017,
  3:57:36 PM MST,
 Brian Cox via Personal_Submersibles
  <personal_submersibles at psubs.org>
 wrote:

        Yes, that's the
  plan. Brian

  --- personal_submersibles at psubs.org
 wrote:

  From: Alan via
  Personal_Submersibles
  <personal_submersibles at psubs.org>
  To:
  Personal Submersibles
 General Discussion

 <personal_submersibles at psubs.org>
  Subject: Re:
 [PSUBS-MAILIST] Scrubber
  Date: Mon, 11 Dec 2017 11:54:08 +1300

  So you are making a
  radial scrubber?Alan

  Sent from my iPad
  On
  11/12/2017, at 11:25 AM,
 Brian Cox via Personal_Submersibles
  <personal_submersibles at psubs.org>
  wrote:

  Correction:   this is
 the
  one I have on
 order: http://www.woodlanddirect.com/Outdoor/Patio-Heaters-Parts-Accessories/Tall-Patio-Heater-Main-Burner-Screen Brian

  --- personal_submersibles at psubs.org
  wrote:

  From: Brian Cox via
  Personal_Submersibles
 <personal_submersibles at psubs.org>
  To: "Personal
 Submersibles General

 Discussion" <personal_submersibles at psubs.org>
  Subject: Re:
 [PSUBS-MAILIST] Scrubber
  Date: Sun, 10 Dec 2017 14:08:35 -0800

  Yes but you want
 maximum
  surface area
 to be coming in from the perimeter of the
  canister , the outside
 should be all screen I should
  think.  I also have this coming by post soon
  : https://www.amazon.com/Main-Burner-Emitter-Screen-10-25/dp/B00V3J1JPC/ref=sr_1_22?ie=UTF8&qid=1494280355&sr=8-22&keywords=patio+heater+replacement+parts  Brian

  --- personal_submersibles at psubs.org
  wrote:

  From: Alan via
  Personal_Submersibles
 <personal_submersibles at psubs.org>
  To: Personal Submersibles
 General Discussion

 <personal_submersibles at psubs.org>
  Subject: Re:
 [PSUBS-MAILIST] Scrubber
  Date: Mon, 11 Dec 2017 11:00:40 +1300

  Brian,I
  have looked at all sorts
 of filters to see if there is
  anything mass produced & cheap that might
 be
  easily adapted.
 Haven't found anythingyet
  that is worthwhile adapting. There may be
 something ( &
  I
 continue tokeep my eyes open) but there are all
  sorts of peculiarities
 specific to a submarines requirements
  like fan, spring, height
 to diameter ratio & a
  transparent container& it seems easier, as
  Emile says, to start with
 an acrylic

 tube.Alan

  Sent from my
  iPad
  On 11/12/2017, at 8:29
 AM,
  Brian Cox via
 Personal_Submersibles <personal_submersibles at psubs.org>
  wrote:

  Hey

 All,                    How
  about these to make a
 scrubber out
  of: http://www.utahbiodieselsupply.com/brewingfilters.php#cornydryhopper  Brian

 _______________________________________________
  Personal_Submersibles
 mailing
  list
  Personal_Submersibles at psubs.org
  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 _______________________________________________
  Personal_Submersibles
 mailing list
  Personal_Submersibles at psubs.org
  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 _______________________________________________
  Personal_Submersibles
 mailing list
  Personal_Submersibles at psubs.org
  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 _______________________________________________
  Personal_Submersibles
 mailing
  list
  Personal_Submersibles at psubs.org
  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 _______________________________________________
  Personal_Submersibles
 mailing list
  Personal_Submersibles at psubs.org
  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 _______________________________________________
  Personal_Submersibles
 mailing list
  Personal_Submersibles at psubs.org
  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 _______________________________________________
  Personal_Submersibles
 mailing list
  Personal_Submersibles at psubs.org
  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

  -----Inline Attachment
 Follows-----

 _______________________________________________
 Personal_Submersibles
 mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 _______________________________________________
 Personal_Submersibles
 mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

             _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 -----Inline Attachment Follows-----