[PSUBS-MAILIST] Scrubber

[Brian Cox via Personal_Submersibles]

You would want enough on hand to give you 72 hours per person.

Brian


--- personal_submersibles at psubs.org wrote:

From: Pete Niedermayr via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Subject: Re: [PSUBS-MAILIST] Scrubber
Date: Thu, 14 Dec 2017 00:43:47 +0000 (UTC)

Hank, Pleases post some pictures. My thought is multiple small scrubbers sealed in cling wrap is the to go. When one is spent unwrap another attach the fan and rock n roll. One could make a router template to make the flat parts for a design like Alec's and easily churn a couple of scrubbers. 
--------------------------------------------
On Sun, 12/10/17, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: Re: [PSUBS-MAILIST] Scrubber
 To: "Brian Cox via Personal_Submersibles" <personal_submersibles at psubs.org>
 Date: Sunday, December 10, 2017, 6:31 PM
 
 
             Brian,I made a scrubber last
 year that works a treat from 4 inch PVC pipe with a 2 inch
 hollow core made with you guessed it 2 inch PVC end caps.
  I bought some screen to cover the aluminum mesh and had to
 do a tiny bit of machining.  I used a PVC threaded cap with
 foam under the cap to compress the absorbent.  Not pretty,
 but works fantastic for under 20 dollars.  Seems anything
 can be a scrubber!Hank
 
             
             
                 
                     
                     
                         On Sunday, December 10, 2017,
 3:57:36 PM MST, Brian Cox via Personal_Submersibles
 <personal_submersibles at psubs.org> wrote:
                     
                     
 
                     
 
                     Yes, that's the
 plan. Brian
 
 --- personal_submersibles at psubs.org wrote:
 
 From: Alan via
 Personal_Submersibles
 <personal_submersibles at psubs.org>
 To:
 Personal Submersibles General Discussion
 <personal_submersibles at psubs.org>
 Subject: Re: [PSUBS-MAILIST] Scrubber
 Date: Mon, 11 Dec 2017 11:54:08 +1300
 
 So you are making a
 radial scrubber?Alan
 
 Sent from my iPad
 On
 11/12/2017, at 11:25 AM, Brian Cox via Personal_Submersibles
 <personal_submersibles at psubs.org>
 wrote:
 
 Correction:   this is the
 one I have on order: http://www.woodlanddirect.com/Outdoor/Patio-Heaters-Parts-Accessories/Tall-Patio-Heater-Main-Burner-Screen Brian
 
 --- personal_submersibles at psubs.org
 wrote:
 
 From: Brian Cox via
 Personal_Submersibles <personal_submersibles at psubs.org>
 To: "Personal Submersibles General
 Discussion" <personal_submersibles at psubs.org>
 Subject: Re: [PSUBS-MAILIST] Scrubber
 Date: Sun, 10 Dec 2017 14:08:35 -0800
 
 Yes but you want maximum
 surface area to be coming in from the perimeter of the
 canister , the outside should be all screen I should
 think.  I also have this coming by post soon
 : https://www.amazon.com/Main-Burner-Emitter-Screen-10-25/dp/B00V3J1JPC/ref=sr_1_22?ie=UTF8&qid=1494280355&sr=8-22&keywords=patio+heater+replacement+parts  Brian
 
 --- personal_submersibles at psubs.org
 wrote:
 
 From: Alan via
 Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion
 <personal_submersibles at psubs.org>
 Subject: Re: [PSUBS-MAILIST] Scrubber
 Date: Mon, 11 Dec 2017 11:00:40 +1300
 
 Brian,I
 have looked at all sorts of filters to see if there is
 anything mass produced & cheap that might be
 easily adapted. Haven't found anythingyet
 that is worthwhile adapting. There may be something ( &
 I continue tokeep my eyes open) but there are all
 sorts of peculiarities specific to a submarines requirements
 like fan, spring, height to diameter ratio & a
 transparent container& it seems easier, as
 Emile says, to start with an acrylic
 tube.Alan
 
 Sent from my
 iPad
 On 11/12/2017, at 8:29 AM,
 Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org>
 wrote:
 
 Hey
 All,                    How
 about these to make a scrubber out
 of: http://www.utahbiodieselsupply.com/brewingfilters.php#cornydryhopper  Brian
 _______________________________________________
 Personal_Submersibles mailing
 list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 _______________________________________________
 Personal_Submersibles mailing
 list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 
                 
             _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 
 -----Inline Attachment Follows-----
 
 

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles