[PSUBS-MAILIST] (no subject)

[Alan via Personal_Submersibles]

Hank,
no you are missing the point! It doesn't matter if the manipulator works well, as
you would only be using it for 5 minutes a few times a year. However it will be
on display out of the water most of the time!
Now how is this for a sexy manipulator ( I have met women that fit that description)
............



Sent from my iPad

> On 7/12/2017, at 12:16 PM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Alan,
> Yes that is what I meant, it is just the trim tab actuators that are meant to work in one direction, witch is not an issue.  Are you saying my arm will not look good ;-(   haha.  I think it will look just fine and more important it will work nice and be simple to build.
> Hank
> 
> On Wednesday, December 6, 2017, 4:10:56 PM MST, Alan via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> 
> Hank,
> I have not heard before that linear actuators should be used for pushing
> rather than pulling. Had a quick google & confirmed that.
> Is it just your lenco actuators that are designed for trim tabs?
> I might want to copy you so are worried about the ascetics of having
> the actuator off to the side. 
> Cheers Alan
> 
> Sent from my iPad
> 
>> On 7/12/2017, at 11:49 AM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>> 
>> Alan
>> Thanks'  no that is how it will stay.  The arm members have to be off set because I can't put two actuators in front of each other.  These actuators are real nice but they won't last if they pull.  That is fine, there are lots of folding cranes with off set booms.  There is a bit of flex in the second stage of the arm but I can add some meat to the joint and it will be good.  
>> Hank
>> 
>> On Wednesday, December 6, 2017, 3:44:12 PM MST, Alan via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>> 
>> 
>> Great work Hank,
>> so will you eventually move the actuator in to a U channel to get
>> things to line up?
>> Alan
>> 
>> Sent from my iPad
>> 
>>> On 7/12/2017, at 11:16 AM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>>> 
>>> Hi All,
>>> Here is part two of the arm build.  The hand is on and the wrist rotates but not under power yet. 
>>> Hank
>>> 
>>> ----- Forwarded Message -----
>>> From: xxx xxxxx <mp13 at live.ca>
>>> To: hanker_20032000 at yahoo.ca <hanker_20032000 at yahoo.ca>
>>> Sent: Wednesday, December 6, 2017, 3:13:45 PM MST
>>> Subject:
>>> 
>>> https://www.youtube.com/watch?v=Cmon2a3bM-s 
>>> <Image 2017-12-06 at 3.13 PM.jpeg>
>>> <Image 2017-12-06 at 3.13 PM.jpeg>
>>> _______________________________________________
>>> Personal_Submersibles mailing list
>>> Personal_Submersibles at psubs.org
>>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>> 
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20171207/0d65da17/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.JPG
Type: image/jpeg
Size: 77422 bytes
Desc: not available
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20171207/0d65da17/attachment-0001.jpe>