[PSUBS-MAILIST] bilge pump
Alan via Personal_Submersibles
personal_submersibles at psubs.org
Wed Dec 6 13:17:15 EST 2017
Hank,
it's a Karcher 36V water blaster / pressure washer. They sell for
around NZ $200-$300- on ebay, about NZ $399 new.
They have a non corrosive pump & are 750psi.
You get a 36V lithium battery with it. So a good emergency back
up battery.
I wired mine to bypass the back pressure switch, but will change it back
as it is a good function to have.
You could pick up a bilge pump real cheap, but I liked the security of
knowing that if it's through hull valve was open at depth that the pump
wouldn't blow to pieces! Am also considering a spring loaded or solenoid
through hull valve, so the valve can never be open if the pump isn't running.
Alan
Sent from my iPad
> On 7/12/2017, at 1:50 AM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>
> Alan,
> Your idea to be able to pump leaked water out through the hull is pretty interesting. Where did you find a 36v dc pump? Maybe I am overthinking the idea.
> Hank
>
> On Tuesday, December 5, 2017, 9:09:19 PM MST, Alan via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>
>
> Hank,
> no not a DSV. I have forgotten the lpm rate, but not high.
> The pressure is 650psi so it can easily operate at my maximum depth of 500ft.
> The intention as a bilge pump was to just act as a hand held suction hose to mop
> up any wash that may come in, & comply with G.L. I am not planning on major leaks!
> I am wanting 2 solenoid ballast valves (inlet & outlet) to work in unison, mainly so
> I can ride a bit higher while towing, as the inlet valve will stop the air in the tank
> compressing, & also as a safe guard if the sub is left floating in the water for
> long periods of time.
> Alan
>
>
> Sent from my iPad
>
>> On 6/12/2017, at 4:28 PM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>>
>> Alan,
>> That will be a pretty slow pump, good for deballasting but not so good if you have a leak at the surface and want to save the sub. So your new sub is going to have sealed ballast tanks? interesting. Hmmmm that makes it a DSV ;-)
>> Hank
>>
>> On Tuesday, December 5, 2017, 5:37:01 PM MST, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>>
>>
>> Hi all,
>> Do any of you sub owners have bilge pumps?
>> Hank
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20171207/4481cbd1/attachment.html>
More information about the Personal_Submersibles
mailing list