[PSUBS-MAILIST] Personal_Submersibles Digest, Vol 50, Issue 29

[Alan via Personal_Submersibles]

Brian,
it's a little difficult to work out but I think it is supposed to be
mounted so the the bottom section is outside of the unit that is to be cooled.
They say it can be used on a home made refrigerator, so the cooling portion
would be inside & heat dissipating section outside.
So no go for a sub. You would be better to just buy two 70W peltiers at $3-
each & glue them on your sub wall with air flowing over them. 
Also this looks like it would be under powered for the area you want to cool.
I would appreciate any feedback on it as I am seriously considering peltiers
for dehumidifying & air conditioning!
Cheers Alan.
 

Sent from my iPad

> On 13/08/2017, at 2:38 AM, Brian Hughes via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Because I'm always looking to tinker, ordered one of these to play with.  The wall of Harold should be an adequate heat sink.  IF it is sufficiently useful (maybe I'll end up needing two), I can play with my new thermoforming machine and make a case to catch the condensate.  I'll let you know after the one month shipping time from China. LOL
> 
> 
> http://www.ebay.com/itm/272750373823
> 
> 
> 
> Get Outlook for Android
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170813/a0e0d14f/attachment-0001.html>