[PSUBS-MAILIST] K350 rear thruster disassemble

[Private via Personal_Submersibles]

Hah! I think you'll find Jon's description of opening up the K600 thrusters useful. It's on the psubs projects page (or at least used to be). I'm assuming k600 housings were similar to k350, but I also seem to remember Harold using some external weld-on tabs to make it easier.

> On Aug 5, 2017, at 11:50 AM, Brian Hughes via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Alec mentioned there's a tale of trial, tribulation and tears about it somewhere here on psubs. Can someone point me to it before I hit the housing with a cutting torch? Or if you are/were the main character in that hero's journey, help me Obi-Wan, you're my only hope.  :-)
> 
> It flooded and I need to take it apart. 
> 
> 
> 
> Get Outlook for Android
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170805/cafd4d9b/attachment.html>