[PSUBS-MAILIST] Co2 scrubbers on eBay

[james cottrell via Personal_Submersibles]

Alec,The reason I ask is because I looked up the part number and the image shown was a coaxial fan. 
Greg

      From: Alec Smyth via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
 Sent: Saturday, April 22, 2017 10:55 PM
 Subject: Re: [PSUBS-MAILIST] Co2 scrubbers on eBay
   
My fan IS a centrifugal blower!
:)
On Sat, Apr 22, 2017 at 10:42 PM, james cottrell via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

Alec,
How does your fan compare to a centrifugal blower of the same wattage as far as pressure is concerned? 
Thanks- Greg


      From: Alec Smyth via Personal_Submersibles <personal_submersibles at psubs. org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs. org> 
 Sent: Saturday, April 22, 2017 4:28 PM
 Subject: Re: [PSUBS-MAILIST] Co2 scrubbers on eBay
   
Hi Brian,
I think this is virtually identical to the scrubbers on Snoopy and Shackleton. If it's any help, I use Delta Electronics model BFB0712H, which is readily available from say Digikey. A handy way to install these is just with bungee cords around the barrel.

Best,
Alec
On Sat, Apr 22, 2017 at 1:15 PM, Brian Hughes via Personal_Submersibles <personal_submersibles at psubs. org> wrote:

Let's keep in touch and compare notes. Some initial thoughts:I have two different style fans inbound, a straight through and a radial. Because the canister loads on the opposite side of the discharge, it means either I'll mount it vertical with the radial fan on the bottom probably all the way aft or horizontally along the aft ceiling with the straight flow discharge pointing forward.Poking around the web it looks like these were designed to be mounted horizontally along the top of a deco chamber. If I went with that, I was thinking a couple squeeze buckle quick disconnect straps attached to two ribs and the ends of the canister drilled and tapped for the other bits. In other words, it could hang down a little, but not rigidly attached. Unclip to remove to refill, etc, Your thoughts?Brian

______________________________ _________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs. org
http://www.psubs.org/mailman/ listinfo.cgi/personal_ submersibles



______________________________ _________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs. org
http://www.psubs.org/mailman/ listinfo.cgi/personal_ submersibles


   
______________________________ _________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs. org
http://www.psubs.org/mailman/ listinfo.cgi/personal_ submersibles



_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170423/41dcc276/attachment.html>