[PSUBS-MAILIST] compensating oil

[Alan James via Personal_Submersibles]

Brian,I have been using this..http://www.dayanoilco.com/upload/product/1451803631.pdfShell morlina S2 BL 10I consulted with a technician who suggested this for my application.It's a 10cst oil. If you go too low in viscosity you shorten the lifeof your bearings.Alan

      From: Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org>
 To: PSubs <personal_submersibles at psubs.org> 
 Sent: Sunday, November 20, 2016 8:49 AM
 Subject: [PSUBS-MAILIST] compensating oil
   
Hi All,               I know this subject has been thoroughly discussed but what would be a good oil to put in my motor pod?  Is there something about transmission fluid that would be bad?  What about hydraulic fluid?  or a light oil like a 0 - 20 weight? Thanks,  Brian 
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20161120/01c762c2/attachment.html>