[PSUBS-MAILIST] CAD for presentation

[Scott Waters via Personal_Submersibles]

Will Rhino 5 and Orca work for loading into a FEA program?Thank you,Scott Waters


Sent from my U.S. Cellular® Smartphone

-------- Original message --------
From: Alan James via Personal_Submersibles <personal_submersibles at psubs.org> 
Date: 05/27/2016  7:03 PM  (GMT-06:00) 
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
Subject: Re: [PSUBS-MAILIST] CAD for presentation 

Scott,I bought Rhino 5 & Orca, which is a plug in to Rhino & the most popularmarine design program. Haven't touched Orca yet but found Rhino 5 wasmanageable to learn.I spent 4 hrs. at a  Solid Works seminar just learning the updates from oneyear to the next. Some of these programs are so big that it's only worth learning them if you are intending to use them 20 hrs. a week & want to dedicate a year or so learning them.I am finding Rhino 5 totally adequate for designing parts.Alan


      From: Scott Waters via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
 Sent: Saturday, May 28, 2016 11:00 AM
 Subject: Re: [PSUBS-MAILIST] CAD for presentation
   
 Alan,I think the advice of just learning a full scale system is good because I will have to do it anyway. The drawings for presentation pourposes are
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160527/0900370a/attachment.html>