[PSUBS-MAILIST] fiberglass

[hank pronk via Personal_Submersibles]

Brian,I find that is a problem, I just roll resin on the surface first then apply dry matt and roll over with resin to soak.  I can't get a reliable soak without applying resin first.  Hank 

    On Friday, May 27, 2016 5:21 PM, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
 

 Hank,    I wanted to mention that some of my brilliant upside down fiberglass work did not go that great.  I did not get the adhesion that I should have, some place seemed fine but other areas I didn't get the resin to soak in good enough.  I may try something else next time.  I may put an initial coat of resin on the underside, soak the fiberglass and then try to compress it up there some how with a plastic mold release barrier. Brian 
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160527/ee1bc640/attachment.html>