[PSUBS-MAILIST] CAD for presentation

[Brian Cox via Personal_Submersibles]

Scott,   You might want to think about getting set up with "machine works" it's a type of cad program that integrates into CNC and also has some FEA capability ( very advanced stuff) .  But you would need some serious computer power to run the program.  But then designed components could then be coded for machining, it has extensive modeling etc.. ,  state of the art stuff.   -  Brian  

--- personal_submersibles at psubs.org wrote:

From: via Personal_Submersibles <personal_submersibles at psubs.org>
To: PSUBS <personal_submersibles at psubs.org>
Subject: [PSUBS-MAILIST] CAD for presentation
Date: Wed, 25 May 2016 15:06:13 -0500

I was wondering if anyone could help me out. I am planning on doing a presentation at Underwater Intervention about the Pisces VI submarine. I am wanting to show the components of the submarine how the sub originally was and then how we are changing it. I am not trained in CAD and was wondering if there is someone out there that could easily do this? 

Thank you,
Scott Waters 
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles