[PSUBS-MAILIST] machining

[Hugh Fulton via Personal_Submersibles]

Hank, There is a unimill but you are light on details.  What size hole and
what size o'ring groove and what diameter etc

 

Hugh

 

 

From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org]
On Behalf Of Emile van Essen via Personal_Submersibles
Sent: Monday, 21 March 2016 9:57 a.m.
To: 'Personal Submersibles General Discussion'
Subject: Re: [PSUBS-MAILIST] machining

 

Hi Hank,

 

The tool does not exist. A profiled drill could do the job. Maybe you can
use a drill that is meant for allen screw pot holes.

 

Emile

 

  _____  

Van: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org]
Namens hank pronk via Personal_Submersibles
Verzonden: zondag 20 maart 2016 20:00
Aan: Personal Submersibles General Discussion
Onderwerp: [PSUBS-MAILIST] machining

 

Hi All,

I need machining info, I am looking for a tool (drill?)  that can drill a
hole and make a o- ring seat at the same time.  Is there such a tool or do I
make one?

Hank

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160321/75a7df41/attachment.html>