[PSUBS-MAILIST] Depth rating for 3D prints

[Alec Smyth via Personal_Submersibles]

Thanks Hank! What size is the opening of the test chamber?

On Mon, Jun 13, 2016 at 10:27 PM, hank pronk via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Alec,
> You can send me small samples for pressure testing to 3,000 psi.  I can
> weigh the part before and after.
>
> Hank
>
>
> On Monday, June 13, 2016 7:01 PM, Alec Smyth via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>
> Hi all,
>
> I'm going to test using 3D printed Kort nozzles on Shackleton, and I have
> an interesting unknown. It would be nice to print them solid, but it would
> just take too long and probably create shrinkage issues. So the question
> is, what fill percent suffices (in 3D printing you get to specify the
> percentage of material fill, the rest being air). I called Greg Cottrell
> and he didn't have any data on prints, but he did have some on the depth
> rating of different types of buoyancy foam.I did a napkin calculation and
> it would appear that, at least if the print behaves like foam of similar
> density, I'm fine. But does anyone have any data on this? Or does anyone
> have a small pressure test chamber for which we might print some test
> samples? I would need to test to about 500 psi.
>
> BTW I've updated Shackleton's project page:
> http://www.psubs.org/projects/1234567810/shackleton/
>
>
>
> Thanks,
>
> Alec
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160613/a02812e8/attachment.html>