[PSUBS-MAILIST] Fw: sealing metheod

[James Frankland via Personal_Submersibles]

Thinking about it, I don't think I have the cork bit actually on that port.
Its the normal ports I had to put the cork bit on.  So the epdm gasket goes
right across.  I have Stachiws book here at work for quick reference, so
checking page 353...yes, its almost the same.  Except I put the O ring into
the little gap.  The gap was unintentional and it just arrived like that
when I got it from Stanleys.  But it fitted an O ring perfectly.  Oh well,
it seems ok.

I just noticed, page 275, is that Gamma?  Suspect its one of the others.
And some odd looking square ports on that forward view tower, if that's
what it is.

On 28 July 2016 at 12:55, hank pronk via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> James,
>
> Thank you for the picture and idea, I have attached a picture from page
> 353 of the Stachiw book that shows similar to what you are showing.  Your
> picture shows exactly what I had except for the o-ring and my EPDM gasket
> went right across without the cork riser.  Your design is much the same as
> design 'A"in the book.
> Hank
>
> On Thursday, July 28, 2016 5:49 AM, xxx xxxxx <mp13 at live.ca> wrote:
>
>
>
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160728/69300e2a/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0379.jpeg
Type: image/jpeg
Size: 17247 bytes
Desc: not available
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160728/69300e2a/attachment-0001.jpeg>