[PSUBS-MAILIST] PSUBS light project status

[Cliff Redus via Personal_Submersibles]

Ken, good news on all fronts.  Welcome back.

Cliff

On Wed, Jul 6, 2016 at 3:31 PM, Ken Martindale via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> To all,
>
>
>
> My wife has been cleared of cancer and I’ll be back on the LED project,
> starting tomorrow.
>
>
>
> Sorry to drop out for so long,
>
>
>
> Ken Martindale
>
>
>
> *From:* Personal_Submersibles [mailto:
> personal_submersibles-bounces at psubs.org] *On Behalf Of *Cliff Redus via
> Personal_Submersibles
> *Sent:* Friday, July 01, 2016 10:40 PM
> *To:* Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> *Subject:* Re: [PSUBS-MAILIST] PSUBS light project status
>
>
>
> Alec, I was doing the 1 arm can for the light and Ken was doing the
> electronics.  Ken bailed out so unless someone steps up to take over the
> LED driver side of the project, we are dead in the water.  If someone could
> source a small OTS LED driver, I could go forward.
>
> On Friday, July 1, 2016, Alec Smyth via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
> Hi gents,
>
>
>
> I have an almost-ready sub but no lights, so was wondering whether to make
> them per the PSUBS-designed model in the community projects section of the
> website. I'm in awe of those drawings! However, they show a printed wiring
> board that is a placeholder for a part still to be designed. I was
> wondering if that might have happened, or if there might be an ETA?
>
>
>
> Thanks,
>
>
> Alec
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160706/909ecad2/attachment.html>