[PSUBS-MAILIST] conical fit

[TOM WHENT via Personal_Submersibles]

That is awesome ! 

----- Original Message -----

From: "hank pronk via Personal_Submersibles" <personal_submersibles at psubs.org> 
To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org> 
Sent: Tuesday, January 12, 2016 12:02:17 PM 
Subject: [PSUBS-MAILIST] conical fit 



Okay it was me and not my lathe ;-( After painstakingly setting the hatch up in the lathe with a dial gauge I found where I went wrong. I set the angle with a very high degree of accuracy and re-checked the angle after locking the the slide down. I discovered the angle changed significantly from the lock down process. That is why I was having trouble. The hatch fits as perfect as I can detect now, Whew! 
Hank 
_______________________________________________ 
Personal_Submersibles mailing list 
Personal_Submersibles at psubs.org 
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160112/5f771c9b/attachment.html>