[PSUBS-MAILIST] STS Sub Design Software

[Sean T. Stevenson via Personal_Submersibles]

I'm astonished that you could build for so little. I guess you DIY'ed pretty much everything?

Sean


On February 8, 2016 11:24:39 AM MST, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>Sean,It will have to be syntactic foam holding up a 516-70 sphere, the
>cheap part is the sphere.  That is the only way I can afford to do it.
> My current sub build is at 12K and I am almost done.  Not bad for the
>depth potential.   I will take it to Burnaby for the  2,000 psi test
>once I am in a cash flow position.  Low oil prices are  killing me!Hank
>
>
>On Monday, February 8, 2016 10:18 AM, Sean T. Stevenson via
>Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
>
>Titanic is sitting at 8000 fsw. That's a tight payload budget to design
>within without a foam block or more exotic hull material.Sean
>
>
>On February 8, 2016 8:38:39 AM MST, hank pronk via
>Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>If I have a good year this year, I hope to build a Titanic capable sub
>exactly the same as what I am building now but much heavier of coarse.
>  I will have EE weld it together and I will have the machining done
>for me also.Hank 
>
>On Monday, February 8, 2016 7:30 AM, Sean ! T.Stevenson via
>Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
>
> Funny, I could say the same thing about your budget.  ;-)Sean
>
>
>On February 8, 2016 6:27:59 AM MST, hank pronk via
>Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>Hi Sean,Thank you for your efforts with your programs, they have been a
>huge help to me.   If I had your knowledge, I would be looking out my
> port at the Titanic.Hank
>
>On Saturday, February 6, 2016 7:03 ! AM, JonWallace via
>Personal_Submersibles <personal_submersibles at psubs.org> w! rote:
> 
>
> 
>The latest version of the STS Sub Design Software written by Sean 
>Stevenson is up on the web site.
>
>WWW.PSUBS.ORG -> Resources & Reference -> Design Tools -> Calculators &
>
>Data Sheets
>
>
>_______________________________________________
>Personal_Submersibles mailing list
>Personal_Submersibles at psubs.org
>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>   
>Personal_Submersibles mailing list
>Personal_Submersibles at psubs.org
>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>_______________________________________________
>Personal_Submersibles mailing list
>Personal_Submersibles at psubs.org
>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>   
>Personal_Submersibles mailing list
>Personal_Submersibles at psubs.org
>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>_______________________________________________
>Personal_Submersibles mailing list
>Personal_Submersibles at psubs.org
>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Personal_Submersibles mailing list
>Personal_Submersibles at psubs.org
>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160208/69b73472/attachment.html>