[PSUBS-MAILIST] Fw: deep diver

[hank pronk via Personal_Submersibles]

Alan,I am relying on the gaps between the floats for air volume when the body is acting as the MBT.Hank 

    On Friday, February 5, 2016 7:18 PM, Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
 

 Hank,well done. With the trawl floats, can you pick up a small size float that will fit in the gapsbetween the larger floats? Could give you a lot more flotation for a smaller size.Cheers Alan

   

   From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
 Sent: Saturday, February 6, 2016 2:47 PM
 Subject: [PSUBS-MAILIST] Fw: deep diver
  
Progress is good on my new build.  I have named it" Elementary 3000"  The sub is all mocked up with interior painted and port installed.  Tomorrow I drive down to the USA to pick up my trawl floats and I can fabricate the fibreglass MBT that also houses the trawl floats.  I see water in my  near future!Hank

     On Friday, February 5, 2016 6:42 PM, xxx xxxxx <mp13 at live.ca> wrote:
 

  


   
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160206/6e60b145/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0277.jpeg
Type: image/jpeg
Size: 19858 bytes
Desc: not available
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160206/6e60b145/attachment-0001.jpeg>