[PSUBS-MAILIST] Mill

[James Frankland via Personal_Submersibles]

thanks all,

I'm off to have a look at it now.....

On 6 April 2016 at 16:49, Emile van Essen via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> James,
>
>
>
> Don’t know the name but the machine looks stable.  Taper 40 is ok.
>
>
>
> Check if you can use the machine as vertical mill. Makes much more sense
> than horizontal!
>
>
>
> Emile
>
>
> ------------------------------
>
> *Van:* Personal_Submersibles [mailto:
> personal_submersibles-bounces at psubs.org] *Namens *James Frankland via
> Personal_Submersibles
> *Verzonden:* woensdag 6 april 2016 15:58
> *Aan:* Personal Submersibles General Discussion
> *Onderwerp:* [PSUBS-MAILIST] Mill
>
>
>
> Anyone know anything about these?  Ive never heard of them.  This one has
> cropped up on a local website.  I am going to have a look after work...
>
>
>
> http://www.tig.gg/l38272-Milling-Machine.php
>
>
>
> kind regards
>
> James
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160406/5499bb9c/attachment.html>