[PSUBS-MAILIST] Mill

[Alec Smyth via Personal_Submersibles]

I have a mill/drill combination machine, but I wish I had a proper mill!
The issue for me is that there is no substitute for mass in a mill or a
lathe, and my mill/drill just doesn't have much of it. This makes it much
more prone to vibration and not very stiff. I can get by, but because it's
lightweight my little combination machine doesn't have anything like the
precision and finish of the real thing. Shame that I too don't have enough
space, or I'd get the biggest machine tools I could.

Best,

Alec

On Wed, Apr 6, 2016 at 10:17 AM, hank pronk via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> James,
> I like the mill and drill combination machine because it takes a lot less
> space.  I have never needed a larger mill with psub builds.
> Hank
>
>
> On Wednesday, April 6, 2016 7:58 AM, James Frankland via
> Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>
>
> Anyone know anything about these?  Ive never heard of them.  This one has
> cropped up on a local website.  I am going to have a look after work...
>
> http://www.tig.gg/l38272-Milling-Machine.php
>
> kind regards
> James
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160406/ad572556/attachment-0001.html>