[PSUBS-MAILIST] syntactic foam

[hank pronk via Personal_Submersibles]

Alan,Yes I could save a few bucks and look good at the same time :-)  I doubt I could make foam for less than trawl floats but maybe Cliff has a cost per lb buoyancy.   There is syntactic foam available that you mix together into your own mould also.  I am also still woking on the titanium spheres.   I have time to sort it out.Hank 


     On Monday, November 16, 2015 5:01 PM, Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
   

 Hank,you could go on a diet :)There is this pdf on making syntactic foam by Cliffhttp://www.psubs.org/design/PDF/SyntacticFoam.pdf
I went to Alvins 50th Birthday party in New Orleans.They said the syntactic foam on it cost $3million. That included all the pressure testingof the individual segments.Alan
      From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
 Sent: Tuesday, November 17, 2015 12:39 PM
 Subject: [PSUBS-MAILIST] syntactic foam
   
Yikes! syntactic foam is costly.  Syntactic foam for 1,000M is 8 dollars per pound buoyancy- trawl floats are 3 dollars per lb buoyancy.    I need almost 1,000 lbs buoyancy.Hank
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20151117/65c2b486/attachment.html>