[PSUBS-MAILIST] STS SubDesigner 0.92a

[Sean T. Stevenson via Personal_Submersibles]

All, please find attached a revised version of the shell calculator
software, which supersedes the previous release.  Since that release,
there have been some minor changes to the layout, some material property
updates, and some changes to mass and volume calculations.  This
version, however, is still limited to spherical, hemispherical and 2:1
semi-ellipsoidal shells.  Stiffened cylindrical shells (on which I am
still working) will be in the next release.

As before, installation is constrained to Windows machines running
64-bit operating systems, and requires the National Instruments LabVIEW
Runtime Engine to be installed first.  Also, this version requires a
different version of the engine than the previous one did.  The link to
the correct engine is below:

http://www.ni.com/download/labview-run-time-engine-2015/5506/en/

After installing the runtime engine, simply extract the attached .ZIP
file to run the application.

Sean






-------------- next part --------------
A non-text attachment was scrubbed...
Name: STS_SubDesigner_092a.zip
Type: application/zip
Size: 437650 bytes
Desc: not available
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20151114/fd9ae0b4/attachment-0001.zip>