[PSUBS-MAILIST] Hull construction cost

[Alan James via Personal_Submersibles]

Hi, thanks but I am after a ball park "hull only"manufacturing cost for standard construction methods,to compare it with other materials & processes.Alan

      From: via Personal_Submersibles <personal_submersibles at psubs.org>
 To: personal_submersibles at psubs.org 
 Sent: Sunday, May 3, 2015 5:10 AM
 Subject: Re: [PSUBS-MAILIST] Hull construction cost
   
Hank I am around Duluth Mn. I don't think bringing it across the border would be a problem. Dean In a message dated 5/2/2015 11:12:49 A.M. Central Daylight Time, personal_submersibles at psubs.org writes:



Dean,
Where are you located, would you haul it over the boarder into Canada?
Hank--------------------------------------------
On Sat, 5/2/15, via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

Subject: Re: [PSUBS-MAILIST] Hull construction cost
To: personal_submersibles at psubs.org
Received: Saturday, May 2, 2015, 10:48 AM


Alan and all. I have a 350, and it needs a good
home.
For just the basic hull I will let it go to the right
person for 7,000. 
That is a lot less then I have
in it. I also have all kinds of goodies to go with it.
All the extra stuff 
can be had for what I paid for
it. I can even transport for the right price.
 
Dean
 

In a message dated 5/2/2015 7:49:02 A.M. Central
Daylight Time, 
personal_submersibles at psubs.org writes:

   
Not intending to be flip, but it's worth 
   whatever someone is willing to pay for it.  From my
experience a used 
   K350 in dive condition can be sold for about 20-30k
depending upon 
   accessories.  When I was in the mood to sell the K600, I
asked for 40K 
   but was only offered between 25-35k so I held on to it
(glad I did now).  
   Dean Ackman is selling his K350 for a ridiculously low
price (in my opinion), 
   check it out on the web site.


On 5/2/2015 12:38 AM, Alan
James via 
   Personal_Submersibles wrote:

   
     
     Any
guesses on what the hull 
     component of a submarine would cost
     to the
stage where it was 
     ready for painting & without view ports in.
     Including
labour.
     Either
K250, 350 or similar 
     size sub.
     Thanks
Alan

      
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles



_______________________________________________
Personal_Submersibles 
   mailing 
   list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

-----Inline Attachment Follows-----

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150502/854f4b09/attachment-0001.html>