[PSUBS-MAILIST] LED light bar

[hank pronk via Personal_Submersibles]

Success, my new light bar is installed and full of oil.  It was remarkably easy, the end caps come off the bar and are quite heavy, so tapping a 1/8 pipe thread was easy.  I filled the light while the end cap was off then reassembled it and topped it up through the hose fitting.  I have a p trap line (1/8 nylon)  and the whole conversion takes less than an hr.  The light works just fine, maybe not as bright as my halogen lights but much easier on power.  The light runs on 10 amps at 24V. 24,000 lumen
Hank