[PSUBS-MAILIST] roundness

Fri Jul 24 14:24:42 EDT 2015

IIRC, 0.005 (1/2 %) R or 0.01 (1 %) D, measured using a template spanning 120° of arc. Can check later tonight.

Sean


On July 24, 2015 11:35:08 AM MDT, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>Hi All,
>Can someone tell me the allowable out of roundness percentage is for a
>sphere hull.
>Hank
>_______________________________________________
>Personal_Submersibles mailing list
>Personal_Submersibles at psubs.org
>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150724/9d83188c/attachment.html>