[PSUBS-MAILIST] dive report

[Sean T. Stevenson via Personal_Submersibles]

I have been a long time user of MG Chemicals potting and encapsulation compounds, and I note that on their product page they have a thermally conductive epoxy listed:

http://www.mgchemicals.com/products/epoxies/potting-and-encapsulating/

You wouldn't cover the LED element with this one, but perhaps the back end?

Sean


On July 23, 2015 6:09:11 AM MDT, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>Hi all,
>I went out to Kootenay Lake and did a dive with Tim and Shelly Novak
>yesterday.  I met an engineer from Ontario, I showed him my killer
>light and he said "why don't you pot the whole thing instead of oil
>filling"  Hmmm I had no response, he also said they have potted LED's
>for use in chemical environments.  I use a crystal clear casting resin
>for making electrical penetrators.  Might be worth a try.
>Hank
>_______________________________________________
>Personal_Submersibles mailing list
>Personal_Submersibles at psubs.org
>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150723/3b22a4ec/attachment.html>