[PSUBS-MAILIST] Snorkel

Thu Jan 15 11:01:58 EST 2015

Hi Alec,
What size are the holes?

Something else that worries me slightly with these sort of valves is that
its just possible for the mushroom top to get knocked off,
particularly where I have mine.  Unlikely I know, but would be nice to have
a protection bar of some sort, or even better, a stop valve on the inside.

Anyway, a modification for another day that one.
James

On 15 January 2015 at 15:19, Brian Cox via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Thanks Alec,  What pressure does the spring hold?
>
> Brian
>
> --- personal_submersibles at psubs.org wrote:
>
> From: Alec Smyth via Personal_Submersibles <
> personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> Subject: Re: [PSUBS-MAILIST] Snorkel
> Date: Thu, 15 Jan 2015 10:08:47 -0500
>
> Here you go... taken apart so you can see it better. I haven't done my
> preseason cleanup, so there's little bits of surface rust.
>
> On Wed, Jan 14, 2015 at 8:55 PM, Brian Cox via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
> Any pictures ?
>
> --- personal_submersibles at psubs.org wrote:
>
> From: Private via Personal_Submersibles <personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> Subject: Re: [PSUBS-MAILIST] Snorkel
> Date: Wed, 14 Jan 2015 19:58:57 -0500
>
>
> Pretty much the same as Emile's. I made a disk with lots of holes in it
> and a spring- loaded cap on the outside. A wing nut inside the sub allows
> you to adjust the cracking pressure, and "manual override" means pressing
> on the stem to make the cap on the outside unseat. We're talking just a few
> hours work to make one of these, it's really simple.
>
> For those who might not have Kittredge's book, there's a story in there
> that is relevant. Kittredge had been tooling around for a while on the
> bottom and there was a very slight air leak in the cabin that he was
> unaware of. He was about to break surface when there was a big womp and
> next thing he found himself outside the sub swimming, and the sub on the
> bottom. The K250 dome had blown out and he'd gone through behind it. It was
> his only accident. Bottom line... Always have an OP valve and a means of
> monitoring cabin pressure.
>
> Best,
>
> Alec
>
>
>
> On Jan 14, 2015, at 7:25 PM, Brian Cox via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
> Alec , what is your over pressure valve?
>
> Brian
>
> --- personal_submersibles at psubs.org wrote:
>
> From: Private via Personal_Submersibles <personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> Subject: Re: [PSUBS-MAILIST] Snorkel
> Date: Wed, 14 Jan 2015 19:02:45 -0500
>
> Hi Sean,
>
> It's extremely easy to relieve negative pressure... You just press the
> plunger and can do it with one finger. I do this almost every time before
> opening the hatch, as a small negative pressure is SOP.
>
> Best,
>
> Alec
>
>
>
> On Jan 14, 2015, at 6:57 PM, Sean T Stevenson via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
> Is it always possible to manually actuate the valve if you have a negative
> differential pressure?  I always presumed that a ball or needle valve would
> be necessary to equalize pressure on either side of a hatch before opening,
> because such a valve accommodates pressure differences in either
> direction.  With the overpressure valve, in such a situation you need to
> overcome this difference in addition to the spring preload. That, or I
> guess you could just bleed some air or oxygen into the cabin.
>
> Sean
>
>
> On January 14, 2015 12:36:36 PM MST, Alan James via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
> Brian,
> I seem to remember you can manually operate Emile's
> overpressure valve; and it is operating procedure to press
> it to relieve the remaining pressure before opening the hatch.
> If you are looking for an off the shelf solution, make sure
> you can do that.
> Alan
>
>   ------------------------------
>  *From:* Brian Cox via Personal_Submersibles <
> personal_submersibles at psubs.org>
> *To:* Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> *Sent:* Thursday, January 15, 2015 6:11 AM
> *Subject:* Re: [PSUBS-MAILIST] Snorkel
>
> I don't see where they list the pressure limit on it.
>
> Brian
>
> --- personal_submersibles at psubs.org wrote:
>
> From: James Frankland via Personal_Submersibles <
> personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> Subject: Re: [PSUBS-MAILIST] Snorkel
> Date: Wed, 14 Jan 2015 16:31:56 +0000
>
> what about something like this?  I only just googled it so would need
> research.  Don't quote me on it!
>
> http://www.haitima.com.tw/valve/check-valve/check-valve-2026.htm
>
> On 14 January 2015 at 15:55, Brian Cox via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>
>
> Is there an off the shelf over pressure valve that I can get?
>
> Brian
>
> --- personal_submersibles at psubs.org wrote:
>
> From: James Frankland via Personal_Submersibles <
> personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> Subject: Re: [PSUBS-MAILIS! T] Snorkel
> Date: Wed, 14 Jan 2015 13:58:24 +0000
>
> Yes, my OP valve does not have enough holes.  I have a job over the
> winter to add more or drill existing holes bigger.
>
> On 14 January 2015 at 13:04, Emile van Essen via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
> Mark, All.
>
> Mind the area is big enough. The valve in the attachment is designed for a
> 3000 Kg sub. But even then it is to small if you surface too quick in case
> of massive overpressure.
> Cracking pressure: 25-75 mBar.
>
>
> Best regards, Emile
>
> -----Oorspronkelijk bericht-----
> Van: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org
> ]
> Namens Mark via Personal_Submersibles
> Verzonden: dinsdag 13 januari 2015 13:12
> Aan: Personal Submersibles General Discussion
> Onderwerp: Re: [PSUBS-MAILIST] Snorkel
>
> Since we are discussing over-pressure valves, can you recommend a make and
> model, or describe its specifications?
>
> Regards,
>
> Mark...
>
> Sent from iPhone.
>
> > On Jan 12, 2015, at 7:06 PM, Pete Niedermayr via Personal_Submersibles
> <personal_submersibles at psubs.org> wrote:
> >
> > Scott, I see you have an overpressure valve in place of the snorkel .
> Whats that on the other side ?
> >
> > Pete ?
> > --------------------------------------------
> > On Mon, 1/12/15, via Personal_Submersibles
> <personal_submersibles at psubs.org> wrote:
> >
> > Subject: Re: [PSUBS-MAILIST] Snorkel
> > To: "Personal Submersibles General Discussion"
> <personal_submersibles at psubs.org>
> > Date: Monday, January 12, 2015, 5:09 PM
> >
> > I
> > would recommend a cabin overpressure valve instead. It is a
> > mushroom valve. You can see pics on my sub page. Alec
> > did the same thing.
> >
> > Thanks,
> > Scott Waters
> >
> >
> > -------- Original
> > Message --------
> > Subject: [PSUBS-MAILIST] Snorkel
> > From: Pete Niedermayr via Personal_Submersibles
> > <personal_submersibles at psubs.org>
> > Date: Mon, January 12, 2015 3:58 pm
> > To: personal_submersibles at psubs.org
> >
> > I have a set of K 350 plans that I'm using as a
> > reference for my own design. I'm using the conning tower
> > plans pretty much as per. The question I do have is. Snorkel
> > or no snorkel ? On the one hand I can see how it would be
> > useful have. On the other hand no other design seems to have
> > one. What are your opinions? Snorkel or no snorkel?
> >
> > Pete
> > _______________________________________________
> > Personal_Submersibles mailing list
> > Personal_Submersibles at psubs.org
> > http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> >
> > -----Inline Attachment Follows-----
> >
> > _______________________________________________
> > Personal_Submersibles mailing list
> > Personal_Submersibles at psubs.org
> > http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> > <1399517720.jpg>
> > _______________________________________________
> > Personal_Submersibles mailing list
> > Personal_Submersibles at psubs.org
> > http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
> _______________________________________________ Personal_Submersibles
> mailing list Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
> _______________________________________________ Personal_Submersibles
> mailing list Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
> ------------------------------
>
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________ Personal_Submersibles
> mailing list Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________ Personal_Submersibles
> mailing list Personal_Submersibles at psubs.org
> <http:///eonapps/ft/wm/page/compose?send_to=Personal_Submersibles%40psubs.org>
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
> --047d7b86c8989cd62d050cb23b69--_______________________________________________
> Personal_Submersibles mailing list Personal_Submersibles at psubs.org
> <http:///eonapps/ft/wm/page/compose?send_to=Personal_Submersibles%40psubs.org>
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150115/b8f5f4d9/attachment-0001.html>