[PSUBS-MAILIST] electro plating

[Alan via Personal_Submersibles]

Hank,
an electroplated surface would be a pain to repair if you needed to.
A massive job getting the plating off & re-doing it. It can bubble or peel
if the surface isn't prepared properly. I worked for an electroplating firm
30+ years ago. 
Alan


Sent from my iPad

> On 31/12/2015, at 2:45 am, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Hi All,
> Has anyone looked at electro plating a hatch and land mating surface.  That is my plan, first copper, then nickel.   I can do it myself at home. 
> Hank
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20151231/b20f15f9/attachment.html>