[PSUBS-MAILIST] motor pod

[Alan via Personal_Submersibles]

Brian,
this could be the site I mentioned. A lot you can glean if you look around it.
http://prevco.com/products/subsea-housings/seal-configuration
Alan

Sent from my iPad

> On 7/09/2014, at 6:50 am, Alan via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Hi Brian,
> I was loooking for a very good link I posted on psubs about sealing canisters; by a firm
> that specialised in building them. Can't find. Only have my Ipad & it's bookmarked on my laptop.
> Someone else may have book marked it. It gave various sealing options & gave the pros & cons.
> Here is one of many articles.
> http://cornerstonerobotics.org/curriculum/lessons_year3/eriii7_pressure_hulls_canisters2.pdf
> This one is based on the book "underwater robotics, science design & fabrication".
> If you Google sealing a canister or home built canister you may find a few designs to choose from.
> Alan
> 
> Sent from my iPad
> 
>> On 7/09/2014, at 5:57 am, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>> 
>> I*'m working on designing my motor pods.  Where I'm at right now is a 10" diameter pipe with hemispheres on each end, the hemisphere with the motor shaft coming thru will be welded on but the other one will basically be like a small hatch with an o ring on the hemisphere side.  And instead of a hinge I'll have a bolt in the center ( with o ring) to secure it down.  I guess I'll need to have some sort of finish ( like stainless) where the hemi "hatch" mates to the pipe, and machine a o ring groove.  I will have to add some small flange to those edges since the pipe is only .365 thick.  I would like the option of either having the pod oil filled or dry .   For all the Kittridge folks out there, is this basically how your motor pods are sealed?
>>  
>>  Thanks,  Brian
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140907/5de92720/attachment.html>