[PSUBS-MAILIST] cue ball arm

[Alan James via Personal_Submersibles]

The body of that valve looks quite deep Hank.http://www.psubs.org/projects/1327775450/gammarestoration/
You won't get much angle of movement with it; or are you goingto cut it down some how?You could posssibly keep that top plate & bolt it to the inside of the hullalong with the bearing surface on that side, & throw away the rest.You would need some way of holding the cue ball in place from the out side.Perhaps cast some resin to hold it in. There won't be much pressure from the inside out.Alan

      From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
 To: personal_submersibles at psubs.org 
 Sent: Friday, November 28, 2014 1:06 PM
 Subject: [PSUBS-MAILIST] cue ball arm
   
Alan,
I posted a picture of the cue ball assembly ready to bolt onto Gamma.  The valve assembly is mounted to the original cover plate.  The pic is under Gamma Restoration.
Hank
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20141128/dd0a7eef/attachment.html>