[PSUBS-MAILIST] Manipulator arm
Hugh Fulton via Personal_Submersibles
personal_submersibles at psubs.org
Thu May 29 19:09:58 EDT 2014
Thanks Hank, great info. And the arms on your project page look pretty
smart. What was the wrist movement and how is that accomplished. Was it
continual rotation or 180 degree.
I see that Hydrolek uses a gerotor. We need a Psubs project to do a manip.
Maybe a good subject for the next meeting. Cheers, Hugh
-----Original Message-----
From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org]
On Behalf Of hank pronk via Personal_Submersibles
Sent: Friday, 30 May 2014 9:25 a.m.
To: Personal Submersibles General Discussion
Subject: Re: [PSUBS-MAILIST] Manipulator arm
Hi Hugh,
The convertible top pumps are about the same size as a wind shield wiper
motor. They are quite small actually. I would say the motor is about 2.5in
dia and 6in tall. They develop 1,000 psi, at least the one I tested did. I
have only used GM pumps, but I am sure they are all the same more less. Also
I have had good success with a common snow plow hyd pump. You will need a
hyd valve bank if you use the snow plow pump. The beauty of a top pump is
that you do not need a valve bank. Gamma has an aircraft pump that according
to the maintenance records works best at 1,100 psi when at max depth of
1,000 feet.
That means you only need about 650psi above bottom for the arm to work. I
have the pressure set at 500 psi for shop testing and it seems good already
at that pressure.
Hank
--------------------------------------------
On Thu, 5/29/14, Hugh Fulton via Personal_Submersibles
<personal_submersibles at psubs.org> wrote:
Subject: Re: [PSUBS-MAILIST] Manipulator arm
To: "'Personal Submersibles General Discussion'"
<personal_submersibles at psubs.org>
Received: Thursday, May 29, 2014, 4:36 PM
Hank,
That seems like very good advice. I am wanting to do a manipulator but
need to get some idea of what lifting or forces are required.
What are the pumps you have found to work best. What pressure do they
develop? I had no idea what a top pump was so googled it and came up with
breast pumps!! I didn't want to make a tit of myself so chased down some
more and found that they are for convertible cars. They look a bit on the
large side diameter wise. Any brand best? Cheers, Hugh
-----Original Message-----
From: Personal_Submersibles
[mailto:personal_submersibles-bounces at psubs.org]
On Behalf Of hank pronk via Personal_Submersibles
Sent: Friday, 30 May 2014 12:21 a.m.
To: Personal Submersibles General Discussion
Subject: Re: [PSUBS-MAILIST] Manipulator arm
Scott,
No matter how you do it, a manipulator will cost some of money. I have
made many and the tendency seems to be, to try and make them strong to
lift a lot. Well first off, I think it was Vance that said it best. A
manipulator is for manipulating not lifting. With that in mind, large
components are not needed. Simple air cylinders from ebay are all that is
needed. A 2in bore and depending on manip design, 4in stroke, maybe as
much as 6in stroke is all you need. Keep the rod size small at 5/8, that
reduces the back pressure. I have said it before, I love convertible top
pumps. Consider using one pump per function again purchase from ebay for
125 bucks. No need for valves, the pump simply runs in reverse to change
direction of the piston. Keep the pumps inside the sub and it is real
simple. As for the arm itself, if have made them from cardboard first.
You can mock it up that way and find the best pin locations for the
cylinders and ensure the cylinders stroke properly without over
centering. You can build the arm with square tubing, use 3 inch aluminum
so the cylinders fit inside when the arm is folded up. Forget about a
wrist until you have lots of time to play around.
Four functions will serve a psubber well and can be built for under 1,000
dollars. I can send you a convertible top pump to play with if you like.
Hank
--------------------------------------------
On Wed, 5/28/14, swaters via Personal_Submersibles
<personal_submersibles at psubs.org>
wrote:
Subject: [PSUBS-MAILIST] Manipulator arm
To: personal_submersibles at psubs.org
Received: Wednesday, May 28, 2014, 9:31 PM
Hey guys. I am
still working on the manipulator arm project for the K boats. I am a
little overwhelmed as to what direction to head. I really don't know where
to start because of my lack of knolwedge. Does anyone have any pointers as
to where to start? I am thinking about using electric motors rather than
hydrolics just because of the amount of external operating
peices. Thanks,Scott Waters
Sent
from my U.S. Cellular© Smartphone
-----Inline Attachment Follows-----
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
__________ Information from ESET NOD32 Antivirus, version of virus
signature database 9862 (20140528) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
__________ Information from ESET NOD32 Antivirus, version of virus
signature database 9862 (20140528) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
__________ Information from ESET NOD32 Antivirus, version of virus signature
database 9866 (20140529) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
__________ Information from ESET NOD32 Antivirus, version of virus signature
database 9867 (20140529) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
__________ Information from ESET NOD32 Antivirus, version of virus signature
database 9867 (20140529) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
More information about the Personal_Submersibles
mailing list