[PSUBS-MAILIST] 12 Volt Charging Plug help

[swaters]

Good to be aware of. I am using AGM batteries. The vent hole is the one spec in the Kitteredge blue prints. It is hydrogen gas that is the danger right? This gas is lighter than air and will go out of the vent hole on the top of the pod right? The charging will be done on the surface with the hatch open. That should be good enough right? Never hurts to double check that I am being safe.
Thanks,
Scott Waters




Sent from my U.S. Cellular© SmartphoneKen Martindale <wmartindale at cfl.rr.com> wrote:Gotta tell this story.
 
We designed and built a 900 watt undersea light with a series of wet Ni-cads. You had to take the case apart for charging so there was plenty of ventilation.
 
Got a call from the customer about a year later saying the unit had exploded with no personal injuries at 112 feet. Turns out the customer had installed a waterproof connector for charging the light
without taking the case apart. He had used it several times before, the gasses built up and it ignited at 112 feet. After this the case was taken apart during charging
And no more problems.
 
Moral to the story: Make sure you have plenty of ventilation when charging wet (flooded) cells as well as no spark sources in the battery pods.
 
Ken Martindale
 
From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of swaters
Sent: Monday, March 10, 2014 3:21 PM
To: Personal Submersibles General Discussion
Subject: Re: [PSUBS-MAILIST] 12 Volt Charging Plug help
 
I never thought of regular AC plugs. To easy! Haha
The batterys will vent out of the same hole the charging cords come out of. 
Thanks,
Scott Waters
 
 
 
 
Sent from my U.S. Cellular© Smartphone

"kocpnt tds.net" <kocpnt at tds.net> wrote:
Hi Scott,
 
I just used two terminals from a 30 amp. 220 volt plug and wired one plug to the charger. I'm assuming that the plugs will be inside the Sub however. How will you vent the pods?
 
Best Regards,
 
Jim K 
 

On Mon, Mar 10, 2014 at 10:58 AM, <swaters at waters-ks.com> wrote:
Hey guys. I am trying to prep my sub for the West Virginia trip. One of the things on my list is to make it so I can charge the batteries without opening the pods. The connection to the pods is a XXL pipe with a cap and the opening is 1.10". I would like to hook up each battery (positive and negative) wire and some form of plug. This plug would need to be a male and female with two prongs (positive and negative for each 12V battery). One plug on the battery wire side which would fit in the 1.10" hole and the other plug on the charger side rather the alligator clips. I have seen plugs like this on golf carts and floor cleaning machines. Any idea where to get them? They need to be able to handle 20amps
Thanks,
Scott Waters

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140310/9389d267/attachment.html>