[PSUBS-MAILIST] 3D printed scrubber

[Private]

Sort by submitter / Alec Smyth



> On Mar 5, 2014, at 8:33 PM, hank pronk <hanker_20032000 at yahoo.ca> wrote:
> 
> Alec,
> What is it under, I can't find it.
> Hank
> 
> 
> On Wednesday, March 5, 2014 6:25:14 PM, Alec Smyth <alecsmyth at gmail.com> wrote:
> Hi all,
> 
> The last few months were so cold in the garage, I found something to do at my desk instead. I've just created a new "project" on the projects page for this little initiative. I printed two scrubbers for the new sub. As its a two person and the scrubbers have provisions for lung-power backup, it made sense to provide each crew member with his own. Although of course the lung-power option is a pretty dire last recourse. If a fan failed on one of the scrubbers, the surviving one should have no difficulty keeping up - its just that it would need refilling in half the time. BTW these are small because I like carrying most of the scrubbing agent in sealed containers, but if one wanted a larger scrubber, its very easy to increase the length of the cylinder while keeping all the printed parts the same.
> 
> Best,
> 
> Alec
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> 
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140305/165eb25e/attachment.html>