[PSUBS-MAILIST] K-250

[Daniel Lance via Personal_Submersibles]

36 " in diameter . The original K250 plans specified A36 . In the 1960s or
1970s that was acceptable when steel was domestically produced. Most A36 is
imported today and of questionable quality .
On Jun 13, 2014 8:37 AM, "swaters via Personal_Submersibles" <
personal_submersibles at psubs.org> wrote:

> The K-250 hull is 4 foot long and 30" OD out of 1/4" ASME 516 gr70 correct?
> Thanks,
> Scott Waters
>
>
>
>
> Sent from my U.S. Cellular© Smartphone
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140613/15b23a3d/attachment.html>