[PSUBS-MAILIST] MK-101 Connectors

Tue Jul 29 09:43:06 EDT 2014

To me it would be better to have a high power BHB2F at the hull side and the BHB2M at the MK-101.  I don't think you want male power pins hull side.  If ever you had the cable detached from the hull side bulkhead connector and had power to the pins it would be easy to short across these exposed pins.  In other words you want it like a house receptical.

Cliff

Cliff Redus

> On Jul 29, 2014, at 8:34 PM, Jon Wallace via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> 
> Talked to Subconn this morning.  The ratings are per unit, not pin. They have a high power BHB2M rated for 50 amps (25 per pin) in brass, aluminum, titanium, and stainless.  Pricing for PSUBS members on 50 amp brass is below $90, 50 amp stainless is below $100.
> 
> Jon
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles