[PSUBS-MAILIST] Diver propulsion vehicle project

[Alec Smyth]

Hi Jon,

Welcome! That is a nicely documented project, and very timely since we
recently had threads about kort nozzles and magnetic couplers. Quick
question... could you tell me what diameter that nozzle (aka shroud) is and
how much it and the prop cost? I'm curious about adapting those to trolling
motors.


Best,

Alec


On Thu, Jan 23, 2014 at 8:47 AM, Jon Eide Pettersen
<jon at pettersen-prod.com>wrote:

> Hi!
>
> I'm currently designing and building a diver propulsion vehicle with a
> magnetically coupled drive. I will use a 48v 500w BLDC motor intended for
> electric trikes, powered by 4 SLA batteries coupled in series.
>
> I'm posting my progress at my personal website,
> http://pettersen-prod.com/project/dpv/index.html.
>
> Anyway, hope you find this interesting! I hope to build a submersible in
> the future, but this will suffice until I have the funding and knowledge
> needed :)
>
>
> Regards,
> Jon Eide Pettersen
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140123/dc4a9d49/attachment.html>