[PSUBS-MAILIST] conical transitions

[Jon Wallace]

Joe, ABS says stiffened cones are to have their ends bounded by two 
heavy stiffeners each located as close as possible to the point of 
cone-to-cylinder transition.

The stiffener is not located on the weld line but as close as possible 
to it.

Jon




On Tuesday, January 7, 2014 5:30:16 AM, Joe Perkel 
<josephperkel at yahoo.com> wrote:
David,

Is that T ring directly on the weld line, or offset any distance?

Joe

Sent from Yahoo Mail for iPad <http://overview.mail.yahoo.com/?.src=iOS>



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140107/16ca0207/attachment.html>