[PSUBS-MAILIST] wanted
hank pronk via Personal_Submersibles
personal_submersibles at psubs.org
Tue Dec 9 15:06:28 EST 2014
Alan,
Thanks' for the lead, I will see if they can do heavier
Hank.--------------------------------------------
On Tue, 12/9/14, Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
Subject: Re: [PSUBS-MAILIST] wanted
To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
Received: Tuesday, December 9, 2014, 2:50 PM
Hi
Hank,these
people have some options.They have
a standard 1/4" thick 36" diameter product.
Are you
going to be able to get out of your sub should the ballast
tank break?Plastic
Domes | Plastic Hemispheres | California Quality Plastics
Plastic Domes and Spheres
Plastic
Domes | Plastic Hemispheres | California
Quality...Acrylic Domes, Plastic Domes &
Hemispheres HomePlastic Domes & Hemispheres Plastic
Domes & Hemis Plastic Spheres Plastic Cylinders Plastic
Bell Jars Camer...View
on plastic-domes-spheres...Preview
by Yahoo
Alan
From: hank pronk via
Personal_Submersibles
<personal_submersibles at psubs.org>
To:
personal_submersibles at psubs.org
Sent: Wednesday,
December 10, 2014 8:36 AM
Subject:
[PSUBS-MAILIST] wanted
Hi all,
I am looking for a 36
in ish dia acrylic dome. The dome will not be a pressure
dome. I intend to remove the front ballast tank from Gamma
and replace it with an acrylic dome. The dome will act as
the new ballast tank. I discovered that sitting in the
front of the sub, the visibility is quite acceptable if it
were not for the steel ballast tank.
Any
leads would be appreciated.
Hank
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-----Inline Attachment Follows-----
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
More information about the Personal_Submersibles
mailing list