[PSUBS-MAILIST] ss tubing supplier

[Alan James via Personal_Submersibles]

Hank,doesn't it have something running up the inside to operate the grippers?Could you incorporate a tube or rod in to this mechanism to strengthen it?Alan
      From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
 Sent: Tuesday, December 2, 2014 11:22 AM
 Subject: Re: [PSUBS-MAILIST] ss tubing supplier
   

Hi Alan,
Thank you for that, your right it might bend.  I could put a reinforcing sleeve in it and epoxy the void.  I think I may have found a supplier of the heavier wall stuff.  Just waiting to hear back.  I have to buy 20 feet, but Dan Lance will take some so that helps.
Hank --------------------------------------------
On Mon, 12/1/14, Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: Re: [PSUBS-MAILIST] ss tubing supplier
 To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
 Received: Monday, December 1, 2014, 5:12 PM
 
 Hi
 Hank,If the
 5/8" thickness (.625") was the OD, then
 this tube with wall thickness of .065" can go to
 12,699ft or 5,595psi. Doesn't matter if it's 1,2, or
 3ft same results.That's
 according to the "Under Pressure"
 program.Maybe
 it bending & breaking is a bigger
 worry.Alan
    
    From: hank pronk via
 Personal_Submersibles
 <personal_submersibles at psubs.org>
 
 To: Personal
 Submersibles General Discussion
 <personal_submersibles at psubs.org> 
 
 Sent: Tuesday,
 December 2, 2014 10:14 AM
  Subject: Re:
 [PSUBS-MAILIST] ss tubing supplier
  
  
 
 Rick, 
 Sced 40
 would be awesome, just can't find it yet.
 Hank--------------------------------------------
 On Mon, 12/1/14, Land N Sea via
 Personal_Submersibles <personal_submersibles at psubs.org>
 wrote:
 
  Subject: Re:
 [PSUBS-MAILIST] ss tubing supplier
  To:
 "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
  Received: Monday, December 1, 2014, 3:00 PM
  
  Not sure on the pressure
  rating but can you go with a schedule 40?
 which is 
  slightly more than 1/8"
  
  Rick
  
  -----Original Message----- 
 
 From: hank pronk via Personal_Submersibles
 
 Sent: Monday, December 01, 2014 9:41 AM
  To:
 Personal Submersibles General Discussion
 
 Subject: Re: [PSUBS-MAILIST] ss tubing
 
 supplier
  
  
  Rick,
  Thank you,
  The heaviest they have is .065
  Any idea what kind of external pressure an
 .065
  wall ss tube can take.
 
 Hank--------------------------------------------
  On Mon, 12/1/14, Land N Sea via
  Personal_Submersibles 
  <personal_submersibles at psubs.org>
  wrote:
  
 
 Subject: Re:
  [PSUBS-MAILIST] ss tubing
 supplier
  To:
 
 "Personal Submersibles General Discussion" 
  <personal_submersibles at psubs.org>
  Received: Monday, December 1, 2014, 2:17 PM
  
  Hank,
  
  Try Alaska copper and Brass in Seattle
  1-800-552-7661 the is where I buy
  most of
  my non ferrous
  metals.
  
 
 Rick
  
  -----Original
 Message-----
  
  From: hank
 pronk via
  Personal_Submersibles
  Sent:
  Monday, December
  01, 2014 8:59 AM
  To: personal_submersibles at psubs.org
  Subject: [PSUBS-MAILIST] ss tubing supplier
  
  Help!
  I
 am
  trying to find some 1/8 wall 5/8 ss
 tubing.  I
  am having no
 
 luck, not
  even
  full
 lengths.
  Hank
 
 _______________________________________________
  Personal_Submersibles mailing list
  Personal_Submersibles at psubs.org
  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 
 
  
  
 
 _______________________________________________
  Personal_Submersibles mailing list
  Personal_Submersibles at psubs.org
  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
  
 
 _______________________________________________
  Personal_Submersibles mailing list
  Personal_Submersibles at psubs.org
  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
  
 
 _______________________________________________
  Personal_Submersibles mailing list
  Personal_Submersibles at psubs.org
  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 
    
 
 -----Inline Attachment Follows-----


 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20141202/cc3c1961/attachment-0001.html>