[PSUBS-MAILIST] acrylic layers

[hank pronk via Personal_Submersibles]

Alan,
I have an idea that would require 7 inch thick acrylic, in the past I got a quote from Reynolds Polymer for a block of acrylic large enough to machine a dome and the cost was pretty darn good.  I would buy a 7 inch thick unfinished disk and take it from there.
sent from my couch ready to leave for the coast, see you soon
Hank
--------------------------------------------
On Tue, 8/19/14, Alan via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: Re: [PSUBS-MAILIST] acrylic layers
 To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
 Received: Tuesday, August 19, 2014, 9:26 PM
 
 Also Hank, is it new or
 10 years old off Ebay???
 Alan
 
 Sent from my iPad
 
 > On 19/08/2014, at 4:48
 pm, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
 wrote:
 > 
 > Does
 anyone know if cast acrylic port material from Reynolds
 Polymer can be substituted for Plexiglass G.
 > thanks'
 > Hank
 >
 _______________________________________________
 > Personal_Submersibles mailing list
 > Personal_Submersibles at psubs.org
 > http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles