[PSUBS-MAILIST] MK-101 Connectors

[Jon Wallace via Personal_Submersibles]

The HPBH4 (m/f) hi-power 50amp per pin (total 4 pins and 200 amps) 
threaded 3/4-16 is going to be right around $180 (US).  The cable 
version including two feet of cable is around $115 (US).  They don't 
have a two pin model strong enough for our needs but are going to look 
at whether they can make it or find one from some other source that will 
work.

So the four pin solution that covers the power requirements of the MK101 
would be right around $300 per motor if you used a threaded female 
bulkhead fitting for the hull and a cabled male fitting either potted or 
globed into the motor.