[PSUBS-MAILIST] O2 regulator

[James Frankland via Personal_Submersibles]

Hi Scott,

Its to hook up to my internal system.  I made it with a female bull nose
adapter so i could just screw the reg i had into it.  See picture.  Ideally
id like to get another bull nose reg but one that has smaller flow rate.
Then i could just remove the old one and replace it.

http://www.guernseysubmarine.com/Extended_files/Page27952.htm

Thanks
james

On 24 April 2014 15:50, via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

>  James,
>
> Are you looking for a CGA fitting to hook onto a welding bottle or a
> fitting to fit on a medical O2 bottle?
>
> Thanks,
> Scott Waters
>
>
>  -------- Original Message --------
> Subject: Re: [PSUBS-MAILIST] O2 regulator
> From: James Frankland via Personal_Submersibles
> <personal_submersibles at psubs.org>
>  Date: Thu, April 24, 2014 7:20 am
> To: Personal Submersibles General Discussion
> <personal_submersibles at psubs.org>
>
> This is the sort of fitting i need.  I can see im going to have to change
> the adapter if i cant find one.
>
>
>
>
> On 24 April 2014 15:07, via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>>  ok. here ya go
>>
>>
>> http://www.amazon.com/OXYGEN-Regulators-0-8-LPM-EA/dp/B004GC4IFG/ref=sr_1_6?s=industrial&ie=UTF8&qid=1398348350&sr=1-6&keywords=Medline+oxygen
>>
>> Mine is plumbed into my system which allows bottle selection so I used
>> NPT. Here is the one that hooks up directly to a bottle.
>>
>> Thanks,
>> Scott Waters
>>
>>
>>  -------- Original Message --------
>> Subject: Re: [PSUBS-MAILIST] O2 regulator
>> From: James Frankland via Personal_Submersibles
>> <personal_submersibles at psubs.org>
>>  Date: Thu, April 24, 2014 6:58 am
>> To: Personal Submersibles General Discussion
>> <personal_submersibles at psubs.org>
>>
>> Hi Scott,
>>
>> Almost there, but its the wrong fitting.  I need a bull nose like you'd
>> fit straight to a welding cylinder.  I made my system to take that sort as
>> thats what my current reg was.  Id prefer not to change it as its all been
>> cleaned etc and is really super simple.
>>
>> Emile, i'll try that guy.  Thanks
>>
>> Regards
>> James
>>
>> On 24 April 2014 14:27, via Personal_Submersibles <
>> personal_submersibles at psubs.org> wrote:
>>
>>>  James,
>>>
>>>
>>> http://www.onlinemedicalsupply.com/p-8020-regulator-oxygen-0-8-lpm-540-cga.aspx?utm_source=GoogleProducts&utm_medium=cpc&utm_campaign=AllProducts&gclid=CK3Ajeuc-b0CFWEV7AodxTMANg#.U1kRH1KPLcs
>>>
>>> This is what I have in my sub. Flow rate down to 1/8 liter
>>>
>>> Thanks,
>>> Scott Waters
>>>
>>>
>>>  -------- Original Message --------
>>> Subject: [PSUBS-MAILIST] O2 regulator
>>> From: James Frankland via Personal_Submersibles
>>> <personal_submersibles at psubs.org>
>>> Date: Thu, April 24, 2014 6:20 am
>>> To: personal_submersibles at psubs.org
>>>
>>> Hi all,
>>>
>>> Does anyone have a good source for medical oxygen flow regulators?  I'd
>>> like the click type with a bull nose fitting, but one that goes as low as
>>> 0.25 Lpm
>>>
>>> The one i have does a minimum of 1 Lpm and its too much, requiring
>>> constant fiddling.
>>>
>>> Thanks
>>> James
>>> ------------------------------
>>> _______________________________________________
>>> Personal_Submersibles mailing list
>>> Personal_Submersibles at psubs.org
>>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>>
>>>
>>> _______________________________________________
>>> Personal_Submersibles mailing list
>>> Personal_Submersibles at psubs.org
>>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>>
>>>
>> ------------------------------
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>
>>
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>
>>
> ------------------------------
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140424/5cbd54fc/attachment.html>