[PSUBS-MAILIST] O2 regulator

[James Frankland via Personal_Submersibles]

Hi Scott,

Almost there, but its the wrong fitting.  I need a bull nose like you'd fit
straight to a welding cylinder.  I made my system to take that sort as
thats what my current reg was.  Id prefer not to change it as its all been
cleaned etc and is really super simple.

Emile, i'll try that guy.  Thanks

Regards
James

On 24 April 2014 14:27, via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

>  James,
>
>
> http://www.onlinemedicalsupply.com/p-8020-regulator-oxygen-0-8-lpm-540-cga.aspx?utm_source=GoogleProducts&utm_medium=cpc&utm_campaign=AllProducts&gclid=CK3Ajeuc-b0CFWEV7AodxTMANg#.U1kRH1KPLcs
>
> This is what I have in my sub. Flow rate down to 1/8 liter
>
> Thanks,
> Scott Waters
>
>
>  -------- Original Message --------
> Subject: [PSUBS-MAILIST] O2 regulator
> From: James Frankland via Personal_Submersibles
> <personal_submersibles at psubs.org>
> Date: Thu, April 24, 2014 6:20 am
> To: personal_submersibles at psubs.org
>
> Hi all,
>
> Does anyone have a good source for medical oxygen flow regulators?  I'd
> like the click type with a bull nose fitting, but one that goes as low as
> 0.25 Lpm
>
> The one i have does a minimum of 1 Lpm and its too much, requiring
> constant fiddling.
>
> Thanks
> James
> ------------------------------
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140424/2b34e6cd/attachment-0001.html>