[PSUBS-MAILIST] K3000 spherical shell calculations

[Sean T. Stevenson]

Metric is easier to debug, but yes, it will have the archaic units as well.  ;-)

Sean


On April 10, 2014 6:44:06 AM MDT, Jon Wallace <jonw at psubs.org> wrote:
>
>Max working depth...his calculator shows a .67 usage factor.   I'm 
>hoping Sean is going to include English units in the final product  :)
>
>
>
>On 4/10/2014 7:53 AM, swaters wrote:
>> Sean,
>> When you are talking about boyancy of the sphere, is the 1152m the
>design depth or crush depth. If it is the design depth, then that
>boyancy vs shell thickness in ASME 516 gr 70 is perfect! If not then
>might have to do some more thinking
>> Thanks,
>> Scott Waters
>>
>>
>>
>>
>
>_______________________________________________
>Personal_Submersibles mailing list
>Personal_Submersibles at psubs.org
>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

-- 
Sent from Kaiten Mail. Please excuse my brevity.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140410/d516951b/attachment.html>