[PSUBS-MAILIST] vacuum packed
jimtoddpsub at aol.com
jimtoddpsub at aol.com
Tue Sep 3 14:24:11 EDT 2013
A small, power saw would be good to have aboard the support vessel as a last resort when it's a choice of saving your dome or your hiney. Best to solve all issues as far upstream as possible to avoid having to work a remedy downstream. There's more time and resources to address it in the shop than on a dive.
It takes a lot more to rip open a steel hatch than acrylic if someone is trapped inside and CO2 is rising.
Jim
Sent on the Sprint® Now Network from my BlackBerry®
-----Original Message-----
From: hank pronk <hanker_20032000 at yahoo.ca>
Sender: "Personal_Submersibles" <personal_submersibles-bounces at psubs.org>
Date: Tue, 3 Sep 2013 11:03:27
To: Personal Submersibles General Discussion<personal_submersibles at psubs.org>
Reply-To: hank pronk <hanker_20032000 at yahoo.ca>,
Personal Submersibles General Discussion
<personal_submersibles at psubs.org>
Subject: Re: [PSUBS-MAILIST] vacuum packed
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
More information about the Personal_Submersibles
mailing list