[PSUBS-MAILIST] vacuum packed

[vbra676539 at aol.com]

We'll need to get Jon in on this for liability considerations. That said, I think there might be a set of Perry drawings out there (although the hatches are heavier than we need) and I have an archive of the Nekton construction drawings that I'm looking for a way to preserve. If the legal end doesn't bite us, then I'm sure we can figure how to adapt proven technology to our requirements, and then provide the result with the K-plans sold on the site.
Vance


-----Original Message-----
From: James Frankland <jamesf at guernseysubmarine.com>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Sent: Tue, Sep 3, 2013 1:45 am
Subject: Re: [PSUBS-MAILIST] vacuum packed



Agree strongly with Vance here, the standard K hatch is rubbish.  If anyone wants to chip in any ideas for a "club design" i'm happy to make it over the winter.  I have a spare dish which was left over from the endcap hole II cut out.  Its just the right size, dished and 13mm thick.
 
Otherwise im probably going to make one anyway (once ive put in a new kitchen at home.. :)
Kind Regards
James 
 

>I do think it would serve us well for someone to design a K-hatch >modified with thru-hatch closure. It is truly nutty to bolt ourselves into a sub >without some way for someone on the outside to help us, should we need >it. Maybe something for the next conference?
 
>Vance

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles





_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20130903/95aa61dc/attachment.html>