[PSUBS-MAILIST] MK 101 Kort Nozzle Assembly

[hank pronk]

Hi Joe,
Nice job, but I see a problem.  The mounting hub looks like it has a gap on both sides of the two hub pieces.  If those two pieces (hub) do not come in full contact on both sides, it will distort the nozzle.  
Hank 



On Friday, November 1, 2013 2:39:00 PM, Jon Wallace <jonw at psubs.org> wrote:
  
Looks great Joe.


On 11/1/2013 2:13 PM, Joe Perkel wrote:
 
Psubbers, 
>
>I have finalized the design of the Kort Nozzle assembly for a Minn Kota 101 as per the dimensions provided me by another builder. There are a few detail pictures on my project page. http://www.psubs.org/projects/1371101163/msvalvinjr./ 
>
>Some assumptions, this is drawn for 11 3/8' dia square tip prop, 3 7/8" body, again with dimensions provided. It requires a concentric attach ring as you see here in SS in the style of a propeller shaft anode. The beauty of that is that it allows fore and aft adjustment as required. 
>
>I will provide the CAD files and 2d drawings with B.O.M, required to Jon for download over the next week or so for whatever process a builder chooses. The nozzle can be scaled to accommodate other prop and body dimensions as required. 
>
>Doing these little projects will help me tremendously when my time comes to build. 
>
>Joe 
>
>       
> 
>
>_______________________________________________
Personal_Submersibles mailing list Personal_Submersibles at psubs.org http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles   


_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20131101/c54e629e/attachment.html>